DRIP TRAY FINISHES

Not all finishes are available in all styles. Most of our drip trays are constructed of durable stainless steel for lasting value.

Brushed
Fine graining is scored into the metal creating a matte finish.

Polished
The metal is highly polished to a chrome-like finish. This durable finish will not chip or pit like chrome. Easy cleaning, just spray with glass cleaner and wipe!

PVD Brass
A base of stainless steel is highly polished to a chrome-like finish and then a brass color coating is electronically applied. PVD coating is scratch and tarnish resistant for years of beautiful service. No need to polish like brass, simply spray with glass cleaner and wipe.

DRIP TRAY STYLES
Surface Series
Surface mount drip trays are the easiest to install. Only one hole is required through the countertop for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.

Cut-out Series
The cut-out series is named for its design of following the flange of the tower. The advantage of this style is better drip coverage for the faucets. Only one hole is required through the countertop for the drain line. The drip tray is secured with a nut and washer attached to the drain pipe.

Recessed Series
Recessed trays provide a clutter free presentation for the bar top. The disadvantage is in installing, a large rectangle needs to be cut into the counter top. The tray is secured to the counter with silicon
sealant.

Bevel Edge
The bevel edge drip tray adds a designer touch to the bar top. The edges of the tray are slanted at a 45° angle creating highlights near the tower.

Wall
Wall mount drip trays are an excellent choice for outside of a walk-in cooler. Shanks with faucets are mounted through the drip tray directly into the walk-in. We offer a variety of pre-drilled shank holes
for an easy installation. A threaded drain is included for easy PVC plumbing connections.

Rinser
Add some dispense excitement to pouring! Simply invert beer glass and push down on built-in sprayer. Cold water is rinsed over the inside of the glass. A wetted glass makes pouring the perfect glass of draught beer easier. Trays are constructed of heavy gauge stainless steel with a durable plastic rinser.  Cold water connection required.

Wrap Around
The Wrap Around mounts under the tower and cantilevers over the bar edge. A threaded drain is included.

DRIP TRAY PARTS
Replacement drains, drain extensions, and hose adapters.