Kronos - 6 304 Faucet Draft Beer Tower, Glycol-Cooled, Wall-Mount w/ Glass Rinser

Save space and serve cold beer with our new wall-mount draft beer tower – Kronos! The brushed stainless steel finish with polished stainless steel faucets provide an eye-catching, hygienic stage for "What's on tap!" The drain is hidden behind a brushed stainless steel skirt for a clean appearance.

Installation Suggestions with Kronos

• Direct Draw – Through the Wall Dispensing. Beer will warm up in the wall space between the interior of the walk-in cooler and the exterior. Guarantee your first pour is cold by utilizing a power pack to circulate cold glycol around the shanks at the point of dispense
• Long Draw – Remote Dispensing. If there is limited space on the bartop or even the back bar consider the Kronos wall-mount dispenser

View Kronos Dimensions 

Perfect for Modular Multi-Faucet Installations

Kronos makes for excellent modular multi-faucet installations. For example: combine two 10-faucet Kronos for a show-stopping 20-faucet draft beer station. Simply plumb the glycol from one station to the other and tie the plumbing together behind the hidden skirt.

Rinser Water Inlet Installation

• Always check local plumbing codes first
• Install an in-line water regulator set at 15 PSI from the street water supply (no greater, perfect operating pressure)
• Install in-line one-way check valve from the street water supply (prevents pressure drop which can cause leaking)
• Install in-line shutoff for the rinser system from the street water supply (this must be turned off nightly)
• If tied into a soda system make sure the system can handle the increased water demand. Have a plumber install a 45° 1/2" O.D. barb for the drains if the line is not hard-plumbed into the system
• Install a shutoff for the water supply if the line is not hard-plumbed into the system

View Water Inlet Components