Kronos - 12 Faucet Beer Tower - Wall-Mount - w/ Glass Rinser

Save space and serve cold beer with our new wall-mount Kronos 12 Faucet Beer Tower! The brushed stainless steel finish with polished stainless steel faucets provide an eye-catching, hygienic stage for "What's on tap!" The drain is hidden behind a brushed stainless steel skirt for a clean appearance.

Installation Suggestions with Kronos Beer Tower

• Direct Draw - Through the Wall Dispensing. Beer will warm up in the wall space between the interior of the walk-in cooler and the exterior. Guarantee your first pour is cold by utilizing a power pack to circulate cold glycol around the shanks at the point of dispense.
• Long Draw - Remote Dispensing. If there is limited space on the bartop or even the back bar - consider the Kronos wall mount beer dispenser.

Perfect for Modular Multi-Faucet Installations

Kronos makes for excellent modular multi-faucet installations. For example: combine two 10 faucet Kronos for a show-stopping 20 faucet draft beer station. Simply plumb the glycol from one station to the other and tie the plumbing together behind the hidden skirt.

Rinser Water Inlet Installation:

• Always check local plumbing codes first.
• Install in-line water regulator set at 15 PSI from the street water supply.
• Install a shutoff rinser on the water supply.

NOTE: It is recommended a licensed plumber connect the glass rinser to the water supply line. Always use an in-line shut-off and water pressure regulator. Micro Matic shall not be held liable for damage caused by improper installation.