Elbow Beer Shank - 1-3/4"L with 3/16" Bore - Chrome-plated Brass
Quantity
Total Cost: $0.00
An elbow beer shank is a variation of the nipple shank in that the nipple with the hose barb has a ninety-degree bend. This bend helps accommodate the beer line while preventing crimping. The elbow is soldered into the shank to prevent the kind of internal leaks that are common in older elbow, flare nut, and gland elbow shanks.
This elbow shank assembly is made of chrome-plated brass. Designed with 7/8"-14 (5/8" BSP U.S. Beer Industry Standard) straight pipe thread, this shank will work with all North American faucets. If you're using equipment from outside North America, you'll need to source a specialty shank.
THIS ELBOW SHANK FEATURES
- Chrome-plated brass
- Connects beer lines to the faucet
- Highly durable
- Fits on North American faucets
NOTE: Barbed elbow will fit 3/16" or 1/4" I.D. tubing. Hex nut not included, order separately.
WARNING: This product contains chemicals known to the State of California to cause cancer and birth defects or other reproductive harm. www.P65Warnings.ca.gov
