FlexiDraft™
- (5)
- (4)
- (4)
- (2)
- (2)
- (2)
- (2)
- (1)
- (1)
- (1)
- (2)
- (2)
_________________________
Flexidraft™
_________________________
![Flexidraft Tower](https://media-cdn.micro-matic.com/v-638558465019376297/1f/a0/c53b-a9ed-467b-a111-a9aa57c980f9/fd_hero_imgfull_new.jpg)
THE BEER LINE REVOLUTIONIZING THE WORLD OF DRAFT BEER
Since 2013, FlexiDraft™ has pioneered a unique solution to a clean beer line with every new keg. FlexiDraft™ utilizes a one-way beer line which eliminates the problems common to conventional draft beer systems: hygiene issues, and the labor and cost for cleaning and maintenance.
The beer line in the case of FlexiDraft™ must be changed along with the keg, the risk of contamination is eliminated and thus cleaning can be reduced to a minimum. In addition, FlexiDraft™ saves on the consumption of water, cleaning detergents, travel time and labor of cleaning beer lines.
Use FlexiDraft™ to ensure draft beer quality and satisfied draft customers.
This widespread popularity is due to the FlexiDraft™ hygienic story: Ensure fresh draft beer with every tapped keg. Great for remote hard to reach retailers and home users.
Related Products
FlexiDraft™ is a global success and can be found in more than 5,000 outlets across the world - and growing! More than 65 local, regional and global brands already use FlexiDraft™.
A clean beer line with every keg change
_________________________
![Standard faucet](https://media-cdn.micro-matic.com/v-638557635884848566/31/7a/1bad-29d7-455f-95e8-e7d1cf0251a5/fd_step1.jpg)
Step 1
Open the the FlexiDraft™ tower by pressing the two buttons. (Make sure the keg coupler is disconnected first.) The upper part will move forward by itself, then lift.
![Creamer Faucet](https://media-cdn.micro-matic.com/v-638558448846161947/1e/94/ac5e-97e8-4dd6-ba62-b1242bb1dfd2/fd_step2.jpg)
step 2
Drop the keg coupler end of the one-way beer line into the tower column. Fix the beer outlet end to the faucet nozzle. Close the tower lid, it will snap securely into place.
![Stout Faucet](https://media-cdn.micro-matic.com/v-638558434146179384/4a/73/5190-b5f0-48e0-a845-923119cf39c8/fd_step3.jpg)
Step 3
Push the beer end of the one-way line into the keg coupler. Place the keg coupler on the new keg and press the handle down to tap the keg.